This is NOT a problem with my wireless AP since the slowness has persisted through two different pieces of hardware on my network (Airlink and now Netgear wireless devices), and also persists across two separate client devices (my Epic and Xoom both do this). I can do internet speed tests on both client devices and get upwards of 20Mbit/s without issue, which should work out to at least 1.5MB/s.
Then today transferring a 150MB file I got this error at about 40% through. Please advise on how to get better transfer rates.
Misc other info: the Xoom runs ICS, the Epic runs Gingerbread. The physical network they connect to is all gigabit (including the wireless AP). Transfers over wireless to PC clients to the same share is 15MB/s or better rather than 400KB/s. Testing was done both at short and medium range on wireless.
NOTE: The following error appears to be related to sleeping when screen goes dark. The option is set to prevent sleep while transfers are active but it apparently still happens on ICS in AndSMB .8
- Code: Select all
Download Failed: jcifs.d.a.d: Transport1 timedout waiting for response to SmbComReadAndX[command=SMB_COM_READ_ANDX,